Chassis

Date Completed

Wash Car

Inspect Frame For Cracks Around Welds and Weak Points

Check for Loose Bolts and Tighten

Inspect Body for Damage, Fix or Replace Panels

Inspect, Clean and lubricate all Heim Joints

Lubricate U-Joints on axle

Clean and grease all Ball Joints and Steering Components

Inspect Safety Restraints for rips and Replace when needed

Inspect all Roll Bar Padding

Clean and lubricate all Shocks and Shock heims

Clean and lubricate Coil Over Eliminators if applictable

Inspect pull bar and Biscuits

Inspect Axle Breather, Clean when needed

Inspect Fuel Cell for damage or leaks

Inspect Fuel lines for cracks or dry rot, replace when needed

Inspect Steering shaft, Clean and lubricate when needed

Inspect all sensors and replace when needed

Inspect Fire System, Refill Bottle after dispersed

Inspect all Wiring and repair as needed

Engine

Date Completed

Inspect Engine for leaks and loose bolts

Inspect cooling system hoses and fluid for cleanliness

Fill cooling system with clean water

Check oil and filter

Inspect all Belts and pulleys

Tighten all header bolts

Check and adjust valve lash if needed

Check Power steering fluid and fill if nessasary

Check and add transmission fluid as needed